TN

Tare Non volatile.

TN

Command Group: Calibration	Access:	Network interfaces:
TAC protected	RW	CANopen	SDO2300sub13
		MODbus	2224,2
TN - Set/Clear non-volatile tare.		PROFIbus	read 3,19 write 4,19

Synopsis:
	Command	Response
Get	TN	T:<Value>
Set	TN <Value>	OK (or ERR)

Valid for	Min. value	Max. value
141.181	0	1
141.184	0	1
141.185	0	1
141.186	0	1
142.181	0	1
142.184	0	1
142.185	0	1
142.186	0	1
143.181	0	1
143.184	0	1
143.185	0	1
151.181	0	1
151.184	0	1
151.186	0	1
152.181	0	1
152.184	0	1
162.181	0	1
179.181	0	1
181.181	0	1
64.181	0	1
64.184	0	1
72.181	0	1
78.183	0	1

TN - Set/Clear Non-volatile tare.
TN 0<CR> Set the tare mode to volatile (Default).
TN 1<CR> Set the tare mode to non volatile - every set/clear tare will write the tare value directly to the EEPROM.
The tare mode is saved by the CS command and is TAC protected.

Valid from Firmware 72.181.v.4.37 and 78.183.v.2.49