TM

Tare mode.

TM

Command Group: Calibration

Access:

Network interfaces:

TAC protected

RW

CANopen

SDO2300sub12

MODbus

2222,2

TM - Tare mode.

PROFIbus

read 3,18 write 4,18

Synopsis:
CommandResponse
GetTMT:<Value>
SetTM <Value>OK (or ERR)
Valid forMin. valueMax. value
141.181 0 1
141.184 0 1
141.185 0 1
141.186 0 1
142.181 0 1
142.184 0 1
142.185 0 1
142.186 0 1
143.181 0 1
143.184 0 1
143.185 0 1
151.181 0 1
151.184 0 1
151.186 0 1
152.181 0 1
152.184 0 1
162.181 0 1
179.181 0 1
181.181 0 1
64.181 0 3
64.184 0 3
68.181 0 1
78.183 0 1


TM - Set tare mode.
TM 0<CR> Set the tare mode allow any tare value.
TM 1<CR> Set the tare mode to R76 compatible (Default). I.e. Tare values below zero are not allowed.
The tare mode is saved by the CS command and is TAC protected.

Valid for LDU78 from Firmware 78.183.v.2.50