Command Group: Communication | Access: | Network interfaces: | |
| RW | CANopen | |
| | MODbus | |
DX - select half(0) or full(1) duplex communication | | PROFIbus | |
| Synopsis: |
| Command | Response |
| Get | DX | X:<Value> |
| Set | DX <Value> | OK (or ERR) |
|
| Valid for | Min. value | Max. value |
| 141.181 |
0 |
1 |
| 141.184 |
0 |
1 |
| 141.185 |
0 |
1 |
| 141.186 |
0 |
1 |
| 143.181 |
0 |
1 |
| 143.184 |
0 |
1 |
| 143.185 |
0 |
1 |
| 151.181 |
0 |
1 |
| 152.181 |
0 |
1 |
| 162.181 |
0 |
1 |
| 179.181 |
0 |
1 |
| 181.181 |
0 |
1 |
| 64.181 |
0 |
1 |
| 64.184 |
0 |
1 |
| 68.181 |
0 |
1 |
| 68.183 |
0 |
1 |
| 69.181 |
0 |
1 |
| 72.181 |
0 |
1 |
| 72.184 |
0 |
1 |
| 78.183 |
0 |
1 |
| 78.184 |
0 |
1 |
| 88.183 |
0 |
1 |
| 88.184 |
0 |
1 |
| 88.185 |
0 |
1 |
|
DX Half or full duplex – this command select half or full duplex communication.
- 0: Half duplex; used with RS485 2-wire communication (default).
- 1: Full duplex; used with RS422 4-wire communication.
To alter startup condition: set DX and save with WP.
See also
AD,
BR,
CL,
and OP