CS

Save Calibration

CS

Command Group: Calibration

Access:

Network interfaces:

TAC protected

W

CANopen

SDO2004sub02

MODbus

2066,1,2

CS - Save the calibration values

PROFIbus

write 28,2,2

Synopsis:
CommandResponse
SetCSOK (or ERR)
Valid forMin. valueMax. value
141.181    
141.184    
141.185    
141.186    
142.181    
142.184    
142.185    
142.186    
143.181    
143.184    
143.185    
151.181    
151.184    
151.186    
152.181    
152.184    
162.181    
179.181    
181.181    
64.181    
64.184    
68.181    
68.183    
69.181    
72.181    
72.184    
78.183    
78.184    
88.183    
88.184    
88.185    


CS Save the calibration values - this command results in the calibration values being saved to EEPROM, and causes the TAC to be incremented by 1. The CS command saves all of the calibration group values, as set by CZ, CG, CM, DS, DP and ZT. The command returns ERR and has no updating action unless it is preceded by the CE XXXXX command, where XXXXX is the current TAC.