AT

Autotransmit

AT


Command Group: Communication

Access:

Network interfaces:

RW

CANopen

MODbus

AT - Set autotransmit mode

PROFIbus


Synopsis:
CommandResponse
GetATA<Value>
SetAT <Value>OK (or ERR)
Valid forMin. valueMax. value
141.181 0 10
141.184 0 10
141.185 0 10
141.186 0 10
142.181 0 10
142.184 0 10
142.185 0 10
142.186 0 10
143.181 0 10
143.184 0 10
143.185 0 10
151.184 0 10
151.186 0 10
152.184 0 10
162.181 0 7
181.181 0 7
68.181 0 7



AT Set (or get) the auto transmit code.
This setting selects if the Device shall start in auto transmission mode upon power-up.
The values are:

ValueDAD141 / DAD142 / LDB151LDU68 / QLC162
0:IDLE (OFF, Factory Default).IDLE (OFF, Factory Default).
1:GROSS.GROSS.
2:NET.NET.
3:AVERAGE.AVERAGE.
4:SAMPLE.PACKET.
5:LONG WEIGHT.SAMPLE.
6:PEAK.LONG WEIGHT.
7:HOLD.LONG AVG. WEIGHT.
8:VALLEY. 
9:PEAK TO PEAK. 
10:HBM AED.