Command Group: DigitalIO | Access: | Network interfaces: | |
| RW | CANopen | SDO2D00sub01 |
| | MODbus | 2076,1 select 2074,1,0 |
AI0 - Assign Input 0 Function | | PROFIbus | read 72,0 write 72,128 |
| Synopsis: |
| Command | Response |
| Get | AI0 | I0:<Value> |
| Set | AI0 <Value> | OK (or ERR) |
|
| Valid for | Min. value | Max. value |
| 141.181 |
0 |
18 |
| 141.184 |
0 |
18 |
| 141.185 |
0 |
18 |
| 141.186 |
0 |
18 |
| 142.181 |
0 |
18 |
| 142.184 |
0 |
18 |
| 142.185 |
0 |
18 |
| 142.186 |
0 |
18 |
| 143.181 |
0 |
18 |
| 143.184 |
0 |
18 |
| 143.185 |
0 |
18 |
|
AI0 Set a function for a logic input 0.
Valid settings are:
- 00 - No function.
- 01 - Remote Zero.
- 02 - Remote Tare.
- 03 - Up Arrow Key.
- 04 - Down Arrow Key.
- 05 - Trigger the average function.
- 06 - Display average value.
- 07 - Display peak value.
- 08 - Clear peak, valley and hold values.
- 09 - Display hold value.
- 10 - Display peak to peak value.
- 11 - Display valley value.
- 12 - Lock keyboard.
- 13 - Trigger hold function.
- 14 - Set tare and reset/clear the peak/valley/hold values.
- 15 - Blank Display.
- 16 - Mass Flow Display.
- 17 - Start / Stop Mass Flow.
- 18 - Freeze / Run Mass Flow.
Please ensure that this logic input is NOT high when setting or changing the function of this logic input.
see also:
_AI1_AssignInput1,
_AI2_AssignInput2,
_AI3_AssignInput3,