AC

Abort Cycle

AC

Command Group: Filling	Access:	Network interfaces:
	W	CANopen	SDO2005sub02
		MODbus	2065,1,0
AC - Aborts the Filling program.		PROFIbus	write 1,0

Synopsis:
	Command	Response
Set	AC	OK (or ERR)

Valid for	Min. value	Max. value
141.184
142.184
143.184
151.184
64.184
72.184
78.184
88.184

AC Issuing the AC command (which has no parameters), will abort the filling cycle immediately, i.e. the ‘Dose program running’ status bit will be reset, the valves will be shut off and the dosing program will stop.

See also SC, DI, DT, GD, TR.
PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PD16, PD17, PD18, PD19, PD20, PD21.